Massachusetts Green Jobs

Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC LEADER, Position Description Number PDD2285P01 and is part of the MA ANG 104th FW, National Guard. This is a BARGAINING Unit position. The unit point of contact and contact phone for this position is: MSGT SEAN DOWD at 413-569-9151 x698-1411 DUAL AGR Responsibilities 1. Leads a team (minimum of three mechanics) and works beside others performing Electronic Integrated Systems maintenance duties. Performs in-process inspections within the shop and on-site of repair, diagnostics, modification, overhaul and/or rebuild of integrated electronic systems and related support equipment. Performs personnel training evaluations and spot checks work. Determines whether quality standards are met by detailed inspection of electronic, electrical, mechanical and operational inspections methods. Investigates causes of critical or major defects and assures corrective actions are taken. Assures that all test and measuring equipment used in the integrated maintenance process is properly calibrated and meets required configuration. Inspects systems to determine if necessary modifications have been accomplished. Advises Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Makes recommendations to depot engineering on TCTO changes. Performs final inspection of work upon completion. The Working Leader is "Red X" qualified. Interacts directly with aircrews for mission/sortie debrief and enhanced system troubleshooting. Responsible for final classification and acceptance of all equipment/material inspected. Inspections include visual, dimensional, electrical or electronic characteristics for conformance to appearance or tolerance requirements and a function/operation test. Assures that all required modification work orders have been applied and necessary records updated. 2. Directs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems. Provides task oversight for employees in the accomplishment of work by the Electronics Integrated Systems Mechanic, WG-2610-13 trades and labor craftsmen. Receives general instructions and guidance from senior supervisor, and ensures that the instructions are carried out precisely by the work team in order to accomplish goals and objectives. Ensures that needed tech data, schematics, plans, blueprints, material, and test equipment is available prior to work initiation. Identifies and balances the workload. Monitors and reports on the status and progress of work. Assures that the supervisor's instructions on work priorities, deadlines, and quality requirements are met. Coaches the team in the selection and application of appropriate problems solving methods and techniques. Trains and arranges for training of team members in methods and techniques of team building and working in teams to accomplish work. Monitors and reports on the status of work in progress and upon completion, as required, to assure the supervisor's instructions on priorities, methods and quality have been met. Maintains the inspection program for area of responsibility and administrative reference materials, including relevant documents, policies, procedures, and written instructions from supervision is available to the team. Prepares reports and maintains records of work accomplishments. Represents the team in dealings with the supervisor for the purpose of obtaining resources and securing needed information or decisions from the supervisor on major work problems and issues. Approves emergency leave up to one day. Investigates causes of critical or major defects and assures corrective action is taken. May stop production to correct discrepancies or unsafe practices. Performs other duties as assigned. Requirements Conditions of Employment Qualifications Military Grades: ENL: TSGT-MSGT Compatible Military Assignments: AFSC: 2A3X4 AREA OF CONSIDERATION: Open to current members of the Massachusetts Air National Guard and those eligible/willing to transfer/enlist. NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position Constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. If you are not sure you are eligible for military membership, please contact a Massachusetts Army National Guard recruiter prior to applying for this position. GENERAL EXPERIENCE: Must have experience, education or training which I have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: Must have at least 24 months of skill and knowledge of the FWS 2610 work at the craftsman level. Capable of leading three or more employees to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Must have the work experiences, along with the a full-range of competencies, to perform the Electronics Integrated Systems Mechanic trades and labor craftsmen's work requirements. Demonstrated competencies and experiences in performing on-or-off equipment maintenance on one-or-more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in leading and performing Electronic Integrated Systems maintenance duties. Skilled in performing in-process inspections within the shop and onsite of repair, diagnostics, modification, overhaul and/or rebuild of integrated electronic systems and related support equipment. Experiences involved performing personnel training evaluations and work spot-check reviews. Skilled in identifying quality standards through detailed reviews of electronic, electrical, mechanical and operational by using inspection methods. Experiences involved investigating causes of critical or major defects and applying corrective actions. Knowledgeable and skilled in testing and measuring the equipment used in the integrated maintenance process to ensure proper calibration and required configuration. Experiences involved inspecting systems to determine if necessary modifications were accomplished. In addition, experiences involved advising aerospace engineering personnel on the operation and maintenance effects of proposed time compliance technical orders modifications on new or existing equipment. Competent in performing inspections of completed work. Competent in performing work that requires direct interactions with aircrews for mission/sortie debrief and enhanced system troubleshooting. Experienced in conducting final classification and acceptance of all inspected equipment and material. Skilled in performing inspections that included visual, dimensional, electrical or electronic characteristics for conformance to appearance or FWS 2610 Qualification Requirements, Continued on Next PageNGB Excepted Service Qualification Standard FWS 2610 17 March 2017 7 tolerance requirements and a function/operation test. Must have the skills to direct onequipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in following instructions and guidance from senior supervisors that resulted in full execution of tasks that successfully accomplished goals and objectives. Experienced in providing technical data, schematics, plans, blueprints, material, and test equipment to complete assigned work. Skilled in identifying and balancing the work requirements. Experiences included monitoring and reporting on work effort, task status and work progress. Skilled in completing the supervisor's instructions on work priorities, deadlines, and quality requirements. Experienced in mentoring and coaching teammembers in the selection and application of appropriate problems solving methods and techniques. Skilled in facilitating and/or skilled and knowledgeable in obtaining training for unit members to learn and improve methods and techniques of team building and working in teams to accomplish work. Experienced in maintaining the inspection program for area of responsibility and administrative reference materials, to include relevant documents, policies, procedures, and written instructions from supervision. Work experiences involved preparing reports and maintaining completed work records. Skilled in negotiating with the supervisor for the purpose of obtaining resources and securing needed information or decisions on major work problems and issues. Must have the skills and abilities to anticipate concerns, investigate causes of critical or major defects, and apply corrective actions. Skilled in conducting environmental safety requirements and identifying equipment handling concerns that resulted in observed safety and housekeeping practices. Experiences included compliance with wearing the appropriate safety equipment and following pertinent safety precautions. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of months/years. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application. MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position. For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program incentive, the following termination rule applies: Incentive Termination without Recoupment: If you accept an Active Guard Reserve (AGR) position or a Military Technician (Mil Tech) Permanent or Indefinite position after 25 February 2010 where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment.